Payment & Shipping Terms:
|Material:||HRC,CRC,Galvanised Steel||Adjustment Type:||By Turbine Worm|
|Cutting Saw:||Cold Saw & Friction Saw Cutting||Pipe Shape:||Round,square,rectangular|
|Welding Type:||High Frequency Welding|
pipe milling machine,
industrial tube mills
uncoiling→shearing and butt welding→material accumulating→flattening→forming system
→high frequency induction welding machine→inside and outside burr removing frame→
water cooling system→sizing system→leveling system→speed testing→Turkish frame→
saw cutting→running out table
|3||Shearing and butt welding machine|
|5||Roller System of Forming|
|7||High Frequency Induction Welding Machine|
|8||Roller System for Moving|
|9||Burr Removing Frame(Inside and outside)|
|10||Water cooling system|
|12||Roller System of Leveling|
|13||Speed Testing Wheel|
|15||Auto flying saw controlled by Computer|
|17||Electric control Equipment|
|18||High frequency welding machine|
Basic necessaries for the Buyer:
|Steel strips||material||Low-carbon steel, low alloy steel:,σs≤345mpa,σb≤610mpa|
|Model||Diameter Range||Pipe Thickness||Line Speed(m/min)|
Low carbon steel, low alloy steel, galvanized steel, stainless steel,etc.Applied raw material of erw pipe mill
HG50 High Precision tube mill/ Low carbon steel pipe making machine
1) Material: carbon steel, alloy steel
2) Mechanical properties: σB≤520mpa; σS≤340mpa
3) Coil ID: φ470-φ510mm
4) Coil OD: φ900-φ1800mm
5) Coil weight: ≤3 tons
6) Width: 40-200mm
7) Installed capacity: approx. 350KW
8) Compressed air capacity: 2m3/min 4-7Kg/cm2
9) Water consumption: 20tons/hr
10) Water consumption for high frequency: 30tons/hr
11) Workshop: height(5M min)(from crane to floor) x width(8M) x length(50M min). Two sets of 5 tons overhead crane are recommended.
1) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
Contact Person: Manager