Payment & Shipping Terms:
|Adjusting:||Worm Gearing||Worm Gearing:||Max.80m/min|
|Cutting Saw:||Friction Saw Cutting||Welding Type:||High Frequency Welding|
|Max.Thickness For Square Pipe:||0.8-3.0mm||Pipe Diameter:||21 - 63mm|
stainless tube mills,
slitting line machine
Straight Seam High Frequency ERW Pipe Mill/Tube Mill
Nantong Reliantt offers almost 30 standard models, covering range from 3/8’’(8mm) up to 10’’(273mm) diameter (corresponding square & rectangular tubes) and wall thickness from 0.3mm up to 12.7mm, also accept customized machines.
Suitable material: Carbon Steel Coil , Galvanized Steel Coil
Straight Seam High Frequency ERW Pipe Mill/Tube Mill Application
1. Water pipe
2. Heating pipe
3. Low-pressure process pipeline
4. Low pressure fire fighting pipeline
5. Sewage Pipes
6. Steel Scaffolding Pipe
7. Wire and cable protection pipe
8. Structural support Steel Pipe
9. Industrial Steel Pipes
10. Decoration Pipe
11. Oil & Gas Pipes
Brief introduction of ERW tube mill & pipe mill
Scroll up → Uncoil → Flattening → End Shear & Butt Welding → Accumulator → Forming → High-frequency induction welding→ Removing external burr → Cooling → Sizing → Cutting → Checking & Collecting → Accessing Warehouse
1. Raw Material
|1||Mateairal applcaition||Hot or cold rolled steel strips, galvanzied steel strips|
|2||Material grade||Low-carbon steel, low alloy steel: δs≤345Mpa|
|3||ID of the steel strips||Φ508-Φ610mm|
|4||OD of the steel strips||Φ800-Φ2000mm|
2. Production Range:
|Round Pipe||32- 140mm||Thickness: 1.0-5.0mm|
|Square Pipe||25*25- 110*110mm||Thickness: 1.0-4.0mm|
|Rectangular Pipe||20*30 - 90*120mm||Thickness: 1.0-4.0mm|
3. H.F. Welder: GGP300Kw Solid State High Frequency Welder
4. Line Spees: Max.70m/min
5. Tube Length: 6-12m
6. Cutting Accuracy: ±3mm
7. Electric installed capacity: appro. 500KW
8. Size of whole line: about 80X9m
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping
Contact Person: Mr.Yan