Max Width 1600mm Max Thickness 4mm High Performance Steel Slitting Line Machine
1. 1600mm Steel Slitting Line Equipment General Introduction
This production line is suitable for continuous longitudinal shearing strips with a width of 800- 1600mm and a thickness of 0.5-4mm for hot-rolled ordinary carbon structural steel, low-alloy structural steel and other materials. Referred to as 1600 × 0.5 ~ 4mm slitting unit.
2. 3x1500mm Carbon Steel Sheet Slitting Machine Production Line Main Parameters and Specifications:
1. Material specification
Material Low carbon HRC (Q235, σs=250Mpa,σb=500Mpa )
Coil Thickness 0.5～4.0 mm
Coil Width 300-1600mm
Coil Weight ≤20 t
Inner diameter Φ508/610
Outer diameter ≤Φ1800mm
2． Finished product specification
Coil weight 20t
Inner diameter Φ508mm
Outer diameter Φ1800mm
Width precision ±0.10 mm(thickness 0.5--3.0)
±0.20 mm(thickness 3.1--4.0)
Burr accuracy ≤5% Plate thickness,(0.08-0.20mm)
Coils open speed 90-120m/min
3.Equipment datas
(1) Power : Voltage 380V Frequency 50HZ Installed power Approx.330kw
(2) Air power Pressure 0.4-0.6Mpa Air demand 0.2m3/min(State of compression)
3.Formal Equipment composition
| No. |
Name |
| 1 |
Coil preparation stage |
| 2 |
Coil car |
| 3 |
Uncoiler |
| |
Pressure leading device |
| 4 |
Clamp&Straightener |
| 5 |
Shearing |
| 6 |
1# Accumulator |
| 7 |
Guiding device |
| 8 |
Pinch roll |
| 9 |
Slitter machine |
| 10 |
Edge rewinder |
| 11 |
Wear tape table and material tail pressing plate |
| 12 |
2# Accumulator |
| 13 |
Seperation device |
| 14 |
Tension plate |
| 15 |
3-roll tension burr extruding machine |
| 16 |
Steering roller and feed head guide plate |
| 17 |
Recoiler+Coiling support |
| 18 |
Unloading car |
| 19 |
Spacer and other process parts |
| 20 |
Hydraulic penumatic system |
| 21 |
Electric system |
| 22 |
Oil pipe,Air pipe,cables |
| 23 |
Anchor bolts and accessories |
Make appropriate changes to the above information according to customer needs
Quality Commitment and Service
1. Equipment warranty for one year, long-term maintenance.
2. Provide general assembly drawing, foundation drawing, piping layout drawing, electrical schematic drawing, wearing parts drawing and other necessary drawings of the equipment.
3. The company has a full-time technical service team, mainly composed of engineers and technicians. After receiving the user's notification, we can give an immediate reply, and send someone to the user's site for after-sales service at any time.
Take photo with customers
Your message must be between 20-3,000 characters!