Payment & Shipping Terms:
|Yield Strength Of Raw Material:||σs≤235Mpa||Tensile Strength Of Raw Material:||σb≤500 Mpa|
|Pipe Size Range:||φ12-φ60mm||Thickness:||0.4-1.8mm|
|Max. Production Speed:||20-120m/min||Fixed Cutting Length:||6-8m|
|Warranty:||One Year||Welding Type:||High Frequency Welding|
cnc ss tube mill machine,
ss tube mill cnc machine,
12mm ss tube mill machine
High-Frequency Welded Pipe Mill Line
|Mechanical properties||δs≤500Mpa δb≤235Mpa|
|Inner Diameter of Coils||Φ460-Φ520mm|
|Outer Diameter of Coils||Φ1200-Φ1800mm|
|Pipe Diameter||Round pipe:φ12-φ60mm|
|(3)The buyer should self-supply|
|Work shop||80x6m, H＞5m(crane to ground)|
|Circulation Cooling Water (whole system)|
|Compressed Air||Flow:5m3/min 5-7kg/cm2|
The uncoiler is of the structure of double expansion and cantilever mandrels.The main body is equipped with pneumatic system to satisfy the needs of expanding, contracting and braking of the mandrels.
|OD of coil||Φ1000-1800mm|
|ID of coil||Φ460-520mm|
|Thickness of strip||0.4-1.8mm|
|Width of strip||36-190mm|
|Weight of single strip||Max2.5T|
|Expansion Type||Hydraulic expand|
Used to cut off the irregular part of the tape head and tail, and align the tape tail of the previous coil with the tape head of the next coil, and weld them together to continuously feed the looper.
Structural form: shear welding bed, pinch feeding device, double centering device, double shearing shearing system, shearing plate system, welding bottom plate driving system, etc.
|Working Cycle||Max.300 seconds|
This machine is between shear welder and host (forming sizing mill) ,use for after a roll of strip steel are used up, before the next roll strip since prepared from uncoiling, shearing and butt welding time to ensure that the host (forming sizing mill) continuous production and store enough strip steel.
|working style||change circle|
|carry material going velocity||Vmax=240m/min|
|advantage||More material, No strike|
|Pinch form||Pneumatic, 6Mpa|
|Diameter of accumulator||4.0 M|
|electric motor power of the press & carry||15KW|
|the electric motor of the accumulator frame||22KW|
Unit layout :
This part is used to squeeze the steel strip into a specific shape, leaving a gap for welding.
2)250KW High frequency welder (Stainless steel special):
HF welder is designed for straight seam induction welding of pipe and for continuous working. The whole set of equipment achieve the function of equipment linkage control and diagnosing faults by PLC system, the working statue is observed by LCD display.
This part is used for polishing welds, and is often used for thin pipes that are not suitable for scratching.
The annealing part adopts a closed environment and is filled with nitrogen to prevent the tube from oxidizing and discoloring during the annealing process.
Finish product to proper shape and straighten.
|Forming Pipe OD.||Round:Φ12-60mm|
|Forming Pipe Wall Thickness||0.4-1.8mm|
|Number. of forming stands, horizontal||8|
|Number. of forming stands, vertical||9|
|Guide Roll Stand||1|
|Squeeze Roll Stand||1|
|No. of sizing stands, horizontal||6|
|Number. of sizing stands, vertical||6|
|Turks Head||2 sets|
|Shaft dia. and material of horizontal roll stand||Φ60mm, Material 40Cr|
|Shaft dia. and Material of vertical roll stand||Φ35mm, Material 40Cr|
Cutting length range: 6-8 metersMaximum linear speed: 120m/min.
Cutting length accuracy: ±1.5mm (Line speed fluctuation does not exceed 2%)
Driving motor:15KW servo
Cut-off mode: Hydraulic
Hydraulic station motor:11KW AC motor
The finished pipes run along the Transit roller and to be automatically moved onto the Bench. Then the staff will pack and palletize.
Contact Person: Ms.Xenia