Coil Weight Max 35000Kg 3~14mm×1600mm Metal Coil Slitting Machine high potency

Coil Weight Max 35000Kg 3~14mm×1600mm Steel Coil Slitting Machine

3~14mm×1600mm Steel Coil Slitting Machine General Introduction

This production line is suitable for continuous longitudinal shearing strips with a width of 800- 1500mm and a thickness of 0.5-3mm for hot-rolled ordinary carbon structural steel, low-alloy structural steel and other materials. Referred to as 1500 × 0.5 ~ 3mm slitting unit.

3~14mm×1600mm Steel Coil Slitting Machine Main Technical Parameters:

A,Machine data:

1,Equipment name: Slitting Line

2,model:14×1600

3,work process:Storage→Feeding→Uncoiling→Feeding→Pinch→Pre-leveling→Hydraulic Shear→Loop Bridge→Deflection Correction→Slitting→Edge Coiling→Loop Bridge→→[Function 1]→Separation→Pinch→Tension Roller→Feeding→Rewinding→Unloading

→[Function 2]→Roller table→Deflection correction→pinch→fine leveling→length measurement→tail pinch→cutting→lifting and stacking

B,Processing material parameters:

Inlet material parameters:

Material: hot rolled steel coil Q235B/Q355B (σs≤400MPa, σb≤550MPa)

Coil thickness: 3mm～14mm (Q235B)  3mm～12mm(Q355B)

Coil width: 700mm～1600mm

Coil inner diameter: Φ610mm, Φ760mm

Coil outer diameter: Φ1000mm～Φ2200mm

Coil weight: Max.35000Kg

Outlet material parameters:

1)Cross-cut finished product parameters:

Length accuracy: length ≤±1.0mm/L=2m

Diagonal ≤±1.5mm/L=2m

Flatness: better than GB709-2006 national standardPalletizing length: 2000mm～12000mm

Palletizing height: Max.400mm

Palletizing load: Max.15000Kg

2)Slitting finished product parameters:

Slitting capacity: up to 3 strips (when the plate thickness is 13-14mm, excluding waste edges)

Maximum 4 strips (when the plate thickness is 11-12mm, excluding waste edges)

Maximum 6 strips (when the plate thickness is 9-10mm, excluding waste edges)

Maximum 8 strips (when the plate thickness is 7-8mm, excluding waste edges)

Maximum 10 strips (when the plate thickness is 3-6mm, excluding waste edges)直线精度:≤0.5mm/1000mm(条宽≥140mm时,侧边料除外)

Slitting width: Min.120mm

Width tolerance: ±0.3mm

Rewinding inner diameter: Φ610mm

Rewinding weight: Max.35000Kg

Tower tolerance: ≤±10mm (3-5 circles inside and outside are not counted)

C,Machine basic data:

Design speed: Max.15-30m/min (at open time, adjust according to plate thickness and material)

Max.30-80m/min (when winding, adjust according to the thickness and material of the plate)

Unit direction: □From left to right or □From right to left (facing the unit on the operating table)

Power supply: three-phase AC 380V, 50Hz

Floor area: ≈65m×11m (L×W)

Use environment: Ambient temperature: -10℃～40℃

Relative humidity: ≤80%

Protection class: IP40

3~14mm×1600mm Steel Coil Slitting Machine Product Design Concept:

1. Reliability: The equipment is designed and manufactured with high reliability to ensure normal and continuous operation of the equipment.

2. Safety: The mechanical, hydraulic and electrical systems of the complete set of equipment are equipped with reliable protection and safety devices. The equipment has emergency stop function and response equipment, and can be automatically or manually stopped in an emergency.

3. Environmental protection: All kinds of hydraulic oil used in the equipment can be reliably recovered and recycled, and no leakage will pollute the environment.

4. Energy saving: The energy consumption of the equipment is fully considered in the design, and the unit with high transfer efficiency is used, combined with the improvement of product accuracy, to reduce self-consumption.

5. Ease of operation: The equipment is easy to operate, and the man-machine dialogue is convenient. Please refer to the description of the electrical system for details.

3~14mm×1600mm Steel Coil Slitting Machine Features:

1. The main power of this machine is driven by a DC motor, which can maintain a stable rotational speed and torque at low speed. It is controlled by a DC speed governor to adjust the power consumption according to different processing specifications.

2. The unit is controlled by a high-end PLC system, and the operator can complete the operation through the touch screen. The software adopts Zeye's self-developed control system (2018SR678630), which is easy to operate and achieves high efficiency and low energy consumption.

3. The main power is equipped with a famous brand hard tooth surface gear reducer, which has high transmission efficiency and small wear.

4. The equipment components are strictly controlled in the production process. After welding, the main components are annealed to eliminate internal stress, then sandblasted and rust-proof, and processed by a new type of precision CNC machining center.

5. Zeye is committed to the design and development of this product, strictly in accordance with national standards in the production process, focusing on software and hardware construction as the basis, with excellent quality and considerate service, and constantly provide domestic and foreign customers with industry Leading-edge sheet metal processing equipment.

Refer to the finished product drawing