Industrial Automatic 20X20-75X75mm Square Tube Mill Mill High Performance
1. Industrial Automatic 20X20-75X75mm Square Tube Mill Mill High Performance
65 high frequency straight welded pipe mill line is used to manufacture welded steel pipe.After we absorbed advanced pipe making technology from both abroad and domestic, our innovative designed production line and each single unit of the production line is not only economical but also practical.
Square pipe size: 20X20-75X75mm Rectangular pipe size:20X25-50X100mm Pipe thickness: 1.0-4.0mm
2.Industrial Automatic 20X20-75X75mm Square Pipe Mill Main Parameters and Specifications
⑴ Material Specifications:
| Material |
low carbon steel galvanize and crabon steel tube |
| Mechanical properties |
σb≤520Mpa,σs≤365MPa
|
| strip width |
80 - 300 mm |
| strip thickness |
1 . 0 - 4 . 0 mm |
| I.D of Coils |
508 mm |
| O.D of Coils |
1800 mm |
| Coil Weight |
≤ 3.5 T |
⑵ Welded Pipe Specification
| Square Pipe Diameter |
20x20-75x75mm |
| pipe thickness |
1 . 0 - 4 . 0 mm |
| Finish pipe length |
6 - 12 m |
| Cut length accuracy |
± 2 mm |
| Forming speed |
40 - 100 m/min |
⑶ workshop require : 7 m X 70 m ,at least 5m high
Notice:You can modify it according to the actual length of the workshop
3. Supplier offered
①equipment debugging and assist the buyer to install the equipment.
②Provide technical training.
③Provide complete after-sales service and permanent technical advice.
④Provide homemade and spare parts for equipment.
Installation and debugging
①The buyer shall install the equipment by itself and the supplier shall assist in the installation.
②The supplier provides a complete set of equipment installation dimensions and external wiring requirements.
③The supplier shall be responsible for the commissioning of the equipment and the buyer shall provide all necessary support except the supplier's equipment.
④The technical personnel of supplier shall comply with the management system of buyer's factory and comply with the organization and arrangement of buyer.
⑤After acceptance of the equipment, technical staff of the supplier shall provide the debugging report.
⑥Where the buyer shall provide accommodation and accommodation for the supplier's debugging personnel.
4. Shipping Pic
Your message must be between 20-3,000 characters!