Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd.
Quality first, Customer first
Sales & Support:
|
Product Details:
Payment & Shipping Terms:
|
| Coil Weight: | ≤10.0T | Coil Thickness: | 0.5-2.5mm |
|---|---|---|---|
| Coil Width: | 12.7-50mm | Inner Diameter: | φ508～φ610mm |
| Outer Diameter: | φ1300～φ1760mm | Speed: | Max 80m/min |
| Warranty: | One Year | Material: | Low Carbon HRC |
| High Light: | 50mm high frequency welded pipe mill,2.5mm high frequency welded pipe mill,hrc high frequency welded tube mill |
||
HG 50 High-Frequency Welded Pipe Production Line
Ι . Machine General Introduction
|
it is designed to produce welded steel pipes ,include round pipe , squre pipe and deformed pipe. Adopting roll pass design, the production line can manufacture welded steel pipes with good quality machining and high precision assembling. |
|
Round pipe:φ12.7-50mm Thickness:0.5-2.5mm |
II. Main Parameters and Specifications:
| (1) Material Specifications: | |
| Standard | SPHC,SPHT-2,SS 400,SS440,SS490 |
| Material | Low carbon steel and low alloy constructional steel |
| Mechanical properties | σb≤520Mpa,σs≤365MPa |
| Strip Width | 39-160mm |
| Strip Thickness: | 0.5-2.5mm |
| Inner Diameter of Coils | Φ508mm |
| Outer Diameter of Coils | Φ1300～φ1760mm |
| Coil Weight | ≤5T |
| (2) Pipe Specification | |
| Pipe Diameter |
Round pipe:φ12.7-50mm Thickness:0.5-2.5mm |
| Length | 6m |
| Pipe-cutting Precision | 0-6mm |
| Forming Speed | Max 80m/min (max size and thickness cannot up to max speed) |
| (3) The buyer should self-supply | |
| Work shop | 60x6m, H＞5m(crane to ground) |
| Power | Approx.450KW 380V/50Hz/3phases |
| Circulation Cooling Water(whole system) |
Flow:20T/h～30 T/h Pool Volume:30m3 |
|
Compressed Air (whole system) |
Flow:5m3/min Pressure: 5-7kg/ cm2 |
| Cable | All cable outside of my machine, you buy after machine fix location. |
III. Each Machine Parameters and Specifications:
(1) Uncoiler
|
Double expansion and cantilever mandrels
|
1. double expansion and cantilever mandrels. 2. Contains two main parts: main body and the fixed base. 3. Equipped with pneumatic system to satisfy the needs of expanding, contracting and braking of the mandrels. 4. Mandrel consists of four-bar linkages that could move radially at the same time. 5.The four-bar linkages in two groups are fitted on two shafts respectively. Powered by air cylinder, they expand and contract radially. |
|||||||||||||||
|
Function:
It is used to parallel cut the tail of the steel strip, which has just gone into the accumulator, and the head of the strip coming out of uncoiler, and then weld them together.
Structure:
Hydraulic Shearing and manual welding Strip steel width: 39mm-160mm Strip steel thickness: 0.5-2.5mm Centering way: manual
(3) Spiral accumulator
|
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
(4) Forming And Sizing Machine
| Forming & Sizing Mill adopts roller type forming principle and high-frequency induction welding. The strip is fed into the forming machine by the feeding device in the mill and the forming roller continuously rotate and press the strip into the required shape. Due to the skin and the kindred effect, the high-frequency current is concentrated on the weld joint that is heated rapidly and reaches the welding temperature. The tube seam is welded under the pressure of squeeze rollers. The finished welded tube with required size can obtained after the cooling, sizing and primary straightening. | ||||||||||||||||||||||
|
(5) Cold saw
|
The cold saw used to precisely cut all kinds of frame tube automatically. Concerning to using high accurate STD control system and machinery system, this unit has the good precisely dimension advantage, and the machinery transfer best advantage, so the quickly ability and accurate processing,without Burr is this unit advantage. |
|
| Square Pipe size | φ12.7-50mm |
| Material | Q235. |
| Speed | Max. 80m/min |
| Cutting Length | 7m |
| Precision | ±3mm |
| Drive motor | 15kw servo motor (yaskawa Japan) |
| Feeding motor | 4.4kw servo motor (yaskawa Japan) |
| Cutting motor | 11KW variable frequency motor. |
(6) Run out table
|
|
1.The finished pipes run along the Roll Table and to be automatically moved onto the Bench. Then simple Packing Machine packs the pipes in hexagon shape.
2.The simple packing machine contains container and pneumatically driven alignment equipment.
3. Motor of Roll Bench: 3KW 4. Two direction down load pipe 5. With frequency converter to control running speed. |
(7) Roller
Water to water cool type
(8) 200 Kw Hifrequency welder
Contact Person: Mr. Yan
Fax: 86-0311-8302-5332
