The F200 high frequency welded tube line is built for mills that switch between Q195, Q235B and Q355B strip without rebuilding the whole forming section. It runs 89 mm round pipe at up to 80 m/min, using a PLC-controlled drive train, Cr12 rollers with chrome plating, and a 500 kW power package on 380V / 50Hz. The layout is 12 m long and weighs around 30,000 kg, so it fits a standard workshop bay while leaving room for the uncoiler, accumulator and run-out table.
This configuration suits producers who serve more than one downstream market. Q195 covers general low-pressure tube and furniture-grade sections, Q235B covers construction and structural pipe, and Q355B covers load-bearing frames and heavier site work. Instead of dedicating a line to one steel grade, the F200 keeps one forming train and changes the process window, which reduces idle time between orders and makes small batch production more practical.
Key Features| Parameter | Specification |
|---|---|
| Model | F200 / 89 |
| Tube outside diameter | 89 mm |
| Strip material | Q195, Q235B, Q355B carbon steel |
| Line speed | Up to 80 m/min |
| Control system | PLC |
| Roller material | Cr12 |
| Roller hardness | HRC58-62 |
| Roller surface | Chrome plating |
| Voltage / frequency | 380V / 50Hz |
| Power | 500 kW |
| Length | 12 m |
| Weight | 30,000 kg |
| Certification | CE, ISO9000, BV |
The F200 is used where one workshop supplies several pipe categories. Construction and engineering buyers use it for scaffold tube, guardrail, fence post and general structural round pipe. Q235B covers common building frames and light structural sections, while Q355B is selected for load-bearing frames, heavy racking and site equipment where higher yield strength is required. The same line also produces furniture tube, display frames, greenhouse arches and low-pressure fluid tube when the wall thickness and surface finish are within the ordered specification.
Because the line runs at 80 m/min with a PLC-controlled sequence, it suits plants that need steady daily output rather than one-off heavy-wall runs. The chrome-plated Cr12 roller set is particularly useful for visible tube, where roller marks and surface scratches raise rejection rates. In a typical layout the line is installed with a double-mandrel uncoiler, a strip accumulator, a shear welder, the forming and welding section, a cooling trough, a sizing section and a flying saw or cut-off, all arranged along the 12 m machine length.
Packaging and Quality AssuranceEach line is packed in wooden crates with moisture-proof wrapping. Roller stands, the control cabinet, the welding unit and the drive motors are packed separately and labeled against the assembly drawing so the receiving team can identify each module before unloading. Small parts, fasteners and sensors are packed in labeled boxes and placed inside the main crate. The machine is fixed to the crate base to prevent movement during road and rail transport.
Every unit is assembled and run at the factory before shipment. The test run covers roller alignment, forming speed, welding stability and cut-off length, and the recorded parameters are supplied with the machine documents. Electrical drawings, the PLC program backup, the operation manual and the spare-parts list are included in the shipment. Warranty scope and duration are stated in the sales contract so both sides work from the same terms.
Selection NotesTo confirm the configuration, send the target pipe diameter, wall thickness, steel grade, required output per shift and the working voltage at your plant. If the product mix includes square or rectangular tube, include the section sizes and corner radius. With those details we can confirm the roller set, the welding power, the cut-off type and the layout length before the order is placed.